UV Ozone Cleaner
All Processing Equipment, Lab Equipment, Solar Cell Prototyping Platform
Please select the correct version of the user manual for your UV Ozone Cleaner. You can find the model number on the sticker on the base of your unit. If the sticker reads "L2002A", please select L2002A2.
UV Ozone Cleaner User Manual (L2002A3)
For units shipped from mid-December 2022
UV Ozone Cleaner User Manual (L2002A2)
For units shipped before mid-December 2022
Type G
Used in the UK, Ireland, Saudi Arabia, Hong Kong, and the UAE.
Type F
Used in the EU (except Ireland), Korea, Russia, Egypt, and mainland China.
Type B
Used in the USA, Canada, Japan, Taiwan, Mexico, and mainland China.
Type I
Used in Australia, New Zealand, and mainland China.
Country not listed? We ship worldwide. Please contact us if you are not sure which plug type you need.
Ultra-Clean Surfaces in Minutes
Produce near-atomically clean surfaces without causing damage to your sample
Overview | Specifications | Features | Gallery | In the Box | Resources and Support
Within minutes, the Ossila UV Ozone Cleaner is capable of removing contamination from the surface of substrates and samples. Using a high-power UV light source to generate ozone and break down organic surface contaminants, you can produce near-atomically clean surfaces without causing any damage to your sample. Volatile compounds created from surface contaminants will quickly evaporate, leaving the sample ready for the next part of your experiment.
The cleaning area has a diameter of 153 mm, providing plenty of space to clean multiple samples at once, microscope slides, or even petri dishes. During cleaning, your delicate samples are protected from overheating as the integrated software monitors the internal temperature and provides readings for the tray, lamp, and electronics.
An essential addition to any lab, our UV ozone cleaner is able to treat a wide range of materials for a number of different applications.
Lightweight Body
Easily moved
High Intensity UV Lamp
Emission at 185 nm and 254 nm
Safe Design
Thermal cutoff and safety interlock
Two-Year Warranty
Buy with confidence
Specifications
| UV Intensity | 15 mW·cm-2 at 185 nm |
|---|---|
| UV Emission | 185 nm and 254 nm LED |
| Lamp Lifetime | >2000 hours |
| Cleaning Area | 153 mm diameter |
| Safety Features | Temperature regulation, thermal cutoff, and drawer interlock |
UV Light Specifications
Lamp Specifications
| Lamp Type | Low pressure mercury discharge lamp |
|---|---|
| Lamp Dimensions | 150 mm x 15 mm (length x diameter) |
| Number of Lamps | 4 |
| Discharge Peaks | 185 nm and 254 nm |
| Lamp Lifetime | T80 lifetime 2000 hours |
Sample Irradiance Specification
| Sample UV Intensity | 15 mW·cm-2 at 185 nm |
|---|---|
| Cleaning Area | 153 mm (6 inch) diameter |
| Exposure Time | 1 second to 60 minute; digitally controlled |
Dimensions and Weight
| Dimensions | 210 mm x 310 mm x 228 mm (W x D x H) |
|---|---|
| Tray Illumination Area | 153 mm (6 inch) diameter circle |
| Maximum Sample Height | 12 mm |
| Weight | 5.25 kg |
Materials and Finish
Case
| Material | 1.5 mm mild steel |
|---|---|
| Finish | Textured black powder coating |
Drawer Tray
| Material | 1.5 mm stainless steel |
|---|---|
| Finish | #4 brushed finish |
User Interface
Display
| Type | 24 bit colour TFT LCD display |
|---|---|
| Resolution | 480 x 272 px |
| Size | 4.3" |
Interface
| Description | Tactile buttons |
|---|
Safety Features
Equipment Safety Features
| Drawer Interlock | Hardware interlock sensor |
|---|---|
| Temperature Regulation | Active lamp cooling - 53 CFM axial fan |
| Thermal Cutoff | Onboard temperature sensors for software cutoff |
Power Supply
Input
| Type | IEC C13 power cable |
|---|---|
| Voltage Range | 110 V - 240 V |
| Fuse | 1 A |
Certification and Standards
| Conformité Européenne (CE) Mark | Low Voltage Directive (2014/35/EU)
Electromagnetic Compatibility (EMC) (2014/30/EU) Restriction of Hazardous Substances (RoHS) (2011/65/EU + 2015/863) |
|---|---|
| British Standards Institution (BSI) | BS EN 61010-1:2010 Safety requirements for electrical equipment for measurement, control, and laboratory use. General requirements. |
Documentation
UV Lamp Spectrum (graph of relative intensity of emission spectrum)
UV Lamp Lifetime (graph of relative intensity over operational time in hours)
UV Ozone Cleaner Manual (December 2022 onwards)
UV Ozone Cleaner Features
High Intensity UV Lamp
Housing a series of high intensity, low pressure synthetic quartz mercury vapour discharge lamps. By utilizing the emission at 185 nm and 254 nm, ozone is generated. The high intensity output gives results quickly and facilitates a large cleaning area.
Large Cleaning Area
The tray can accommodate wafers up to 153 mm in diameter and 12mm in thickness for a wide array of samples, including:
Microscope slidesDiced substratesPetri dishesAFM tips
Simple to Use Interface
The bright LCD display and tactile keypad provide a simple interface.
The integrated software continuously monitors the temperature inside the system and gives readings for the tray, UV lamp, and electronics. This makes it easy to make sure that delicate samples do not overheat.
Designed with Safety in Mind
Our system adheres to BS EN 61010-1:2010 standards alongside EMC, Low Voltage, and RoHS CE directives. Smart safety features include an integrated safety interlock which keeps the lamp off while the tray is open. Plus, a thermal cutoff is triggered if the temperature detected by any of the internal sensors is too high.
UV Lamp Replacement Service
Every UV bulb has a finite lifetime and lower bulb intensity means increased cleaning times. When this happens, we offer a UV Lamp Replacement Service. We will replace your bulbs, fully test all components, ensuring they meet all safety standards, and safely dispose of your old bulbs. This ensures minimal downtime and maximum lifetime for your equipment.
UV Ozone Cleaner Gallery
UV Lamp Replacement Service
For safe and successful bulb replacement, simply place an order for a new bulb and send the UV Ozone Cleaner back to us at Ossila. Once it arrives in house, we can replace the bulb and have it ready for return within 48 hours. Within this service, we will:
- Replace the UV bulb
- Fully test all components to ensure they are working as intended
- Check that all components meet the required safety standard
- Safely dispose of the old bulb
We recommend bulb replacement is undertaken by us rather than installing the bulb yourself as the system operates at high voltage. Incorrect assembly of the unit after bulb replacement may result in serious or fatal injury. Please feel free to contact us if you have any questions about this.
In the Box
- UV Ozone Cleaner
- Power supply
Resources and Support
Which UV Ozone Cleaner Features do I Need?
It is always important to assess the necessity and applicability of additional features in your experimental set up. The Ossila UV Ozone Cleaner is built with simplicity and efficacy in mind.
Read more...