Substrates and Fabrication | PV, OLED, OFET & Spectroscopy | Tagged "evaporation mask"

Quickly and easily fabricate and characterise thin-film devices for OPVs, OLEDs, OFETs/TFTs and sensors with our range of substrates and fabrication accessories. Popular products include our ITO glass substrates (such as our unpatterned ITO glass substrates or generation III 8 pixel ITO glass photovoltaic substrates), FTO glass substrates, silicon substrates, and the corresponding deposition masks. We have also designed a number of test chips and boards to take the hassle out of device testing; our electronic test boards have a simple push-fit design with connection pins that align perfectly with the contacts on our substrates.

Not sure what you need? Start by filtering by application. If you're looking to fabricate photovoltaics or OLEDs, the latest (generation III) 8-pixel design of substrates and masks allow you to create either eight small individual pixels or a single large pixel.

Looking for generation I or generation II systems for S101 or S171 substrates?

We have discontinued our generation I and generation II substrates and masks. Contact us for more information, support with generation I and II products, or for help migrating to the new 8-pixel design.

Browse Substrates and Fabrication Supplies

Filter by type: substrate evaporation mask coverslip evaporation stack testing cleaning

Filter by tag: small pixel large pixel module scale-up unpatterned low density high density

Resources and Support

How to load the Low density OFET stack

Carefully place the evaporation mask on the lower support of the evaporation stack. Place the upper support / substrate holder on top of the evaporation mask.

How to load the High density OFET stack

Carefully place the evaporation masks into the substrate holder. Place the silicon substrates on top of the masks with the polished surface touching the mask

Organic & Thin Film Field Effect Transistor Fabrication Guide

The Ossila pre-patterned OFET substrates have been designed to enable the fabrication and characterisation of transistors without the need for vacuum evaporation systems or probe stations.

Long Channel OFET Fabrication System Overview

The Long Channel Organic Field-Effect Transistor (OFET) source/drain evaporation stack is designed to make fabrication as simple as possible so you can focus on material testing rather than fabrication.